|
Please click the Select Your Hoist link and use the
PRODUCT SEARCH application to find the exact
Shaw-Box hoist you need. If you are not sure of what type of hoist
application you need, please contact us.
Hoist specifications that would be helpful to know ahead of time include:
-
Lifting Capacity - 1 Ton, 2 Ton, 5 Ton,
7½ Ton, 10 Ton, 15 Ton
-
Voltage - 208V / 230V / 460V, 3 Phase
-
Desired Lift Height (40' Maximum Lift Height)
-
Bridge Crane Replacement -
No Mainline Contactor,
No Pendant
-
Monorail Hoist Application -
Includes Mainline Contactor and Pendant
|
| World Series Wire Rope
Hoists |
|
|
|
|
|
|
Lifting Capacities: |
|
- 1 Ton
- 2 Ton
- 3 Ton
- 5 Ton
- 7½ Ton
- 10 Ton
- 15 Ton
|
|
|
Suspension Type |
|
|
|
|
Standard Shaw-Box Hoist Features
|
|
Gear Case and Motor |
|
|
Triple reduction hoist gearing is oil bath lubricated,
operating in an oil-tight, cast aluminum gear case. The
gear case is conveniently located to allow ease of
access in the air, while providing a low headroom design
with maximum lift. The motor is two-speed with a 4:1
ratio from high to low speed; giving a low speed for
precise load handling and a high speed for fast
throughput.
|
|
|
Wire Rope Drum and Rope Guide |
|
The
wire rope drum is machined from quality steel,
deep-grooved with a rope guide to help ensure the rope
stays in the grooves.
|
|
|
Drum, Reeving and Lower Block |
|
Hoist is reeved to a low-headroom design lower block for
minimum headroom and maximum lift. Wire rope is secured
to the drum with three heavy ductile iron clamps and
designed to have three extra wraps of wire rope on the
drum with the rope at full extension (low hook).
|
|
|
Upper / Lower Gear Limited Switch |
|
The
hoist is provided with an upper / lower, geared control
circuit hoist motion limit switch as standard. An
additional block operated upper control circuit limit
switch is available as an option.
|
|
|
Hoist OVER Capacity Limit Switch |
|
A
hoist overcapacity limit switch is provided as standard
to prevent lifting excessive overloads.
|
|
|
Control Panel |
|
|
Hoist and trolley controls are housed in a common NEMA
4/12 enclosure with the following features as standard: |
|
-
Phase-loss detection / protection
-
Motor line fusing
-
Fused control circuit transformer
-
Hoist motion monitor
-
Motor thermal overloads
-
Hoist over capacity limit switch
-
All components are of the
highest quality
and the panel design meets National
Electric
Code (NEC).
|
|